服务热线
13795313415(微信同号)
德国FIUTEC阀*找维特锐
德国FIUTEC阀提供一手渠道的原装供应,提供德国FIUTEC阀型号或者铭牌询价!
德国FIUTEC阀的技术特点!
德国FIUTEC阀开裂压力(在DRV上):
0.5巴
媒体工作温度范围:
分钟。 -20°C至zui大。 + 100°C
德国FIUTEC阀环境温度范围:
分钟。 -20°C至zui大。 + 100°C
德国FIUTEC阀工作液:
符合DIN 51524第1部分和第2部分的液压油
粘度范围:
分钟。 2.8mm²/ s到zui大。 800平方毫米/秒
过滤:
根据ISO 4406或更清洁的等级21/19/16
德国FIUTEC阀MTTFd值:
150年(参见手册5.300中的“阀门的条件和说明”)
安装:
没有方向限制,是水平的
材料:
德国FIUTEC阀阀体:
钢
德国FIUTEC阀活塞:
硬化和研磨的钢
密封:
FKM(标准)
德国FIUTEC阀材质:
PTFE
德国FIUTEC阀*找维特锐
The DV is an inline mounted flow control valve which controls the flow by adjusting the cross-section. The flow rate is therefore dependent on the pressure differential and viscosity. Starting with the throttle spindle in the fully closed position, the flow rate increases in accordance with the appropriate curve as the control knob is turned. The flow is controlled in both directions.
The scale on the lower edge of the control knob enables accurate repeat setting. The DRV is a flow control valve in the same design which also allows the same fine flow adjustment, but in one direction only. Unrestricted flow in the reverse direction is via the built-in check valve (cracking pressure 0.5 bar).
德国FIUTEC阀也支持技术指导!
期待广大客户咨询!
我们竭诚为您服务!
此版权信息属于上海维特锐,欲了解更多相关产品,请!
负责人:徐耀滨
公司:上海维特锐实业发展有限公司
地址:上海市普陀区中江路889号曹杨商务大厦 1501-1502
:
(同号)